Maths from examples - Learning advanced mathematical computations from examples

This is the source code and data sets relevant to the paper Learning advanced mathematical computations from examples, by Amaury hayat, François Charton and Guillaume Lample, published by ICLR 2021.

We provide code for

data generation
model training
model evaluation

We also provide

7 datasets
7 pretrained models

Dependencies

Python (3.8+)
Numpy (1.16.4+)
Sympy (1.4+)
Pytorch (1.7.1+)
Control library (0.8.4, from conda-forge)
CUDA (i.e. a NVIDIA chip) if you intend to use a GPU
Apex for half-precision training

Important notes

Learning with and without GPU

All the code can run on CPU only (set parameter --cpu to true). Data generation is to be done on CPU only. Model training and model evaluation can be done on CPU, but training will be extremely slow. To train or evaluate with a GPU, you need a CUDA-enabled GPU (i.e. a NVIDIA chip).

We support:

Half-Precision (with NVIDIA Apex library): set parameters --fp16 true --amp 2, to disable, set --fp16 false --amp -1
Multi-GPU training: to run an experiment with several GPU on a unique machine, use

export NGPU=8; python -m torch.distributed.launch --nproc_per_node=$NGPU train.py  # parameters for your experiment

Multi-node training: using GPU on different machines is handled by SLURM (see code)

On GPU with limited video memory, you will need to reduce memory usage by adjusting --batch_size. Try to set it to the largest value that will fit in your CUDA memory. Since model optimization is performed at the end of each minibatch, smaller batch sizes will gratly slow learning. You can compensate for this by increasing --accumulate_gradient, which controls the number of mini-batches the model sees before optimizing the model.

Dump paths and experiment names

All paths should be absolute : --dump_path ./mydump might not work, --dump_path c:/Users/me/mydump should be fine. The directories where your datasets, models, and logfiles will be generated are constructed from the parameters --dump_path --exp_name and --exp_id, as {dump_path}/{exp_name}/{exp_id}/, if you do not specify an exp_id, a random unique name will be created for you. If you reuse the same dump_path/exp/name/exp_id, generation or training will resume there (adding new examples, or loading the previous model for training).

All results will be logged in file train.logof the experiment path.

All models and datasets can be downloaded from https://dl.fbaipublicfiles.com/MathsFromExamples/. By convention, in all code examples, datasets and models use the path /checkpoint/fcharton/dumped/. You will need to adjust this to the correct path on your local machine.

Data sets

We provide 7 datasets, all can be found on https://dl.fbaipublicfiles.com/MathsFromExamples/data/ as tar.gz archives.

Stability : balanced sample of systems of degree 2 to 5 (50% stable), predicting speed of convergence at 0.01 (largest real part of eigenvalue):

in archive https://dl.fbaipublicfiles.com/MathsFromExamples/data/ddss_stability_balanced.tar.gz

ddss_stability_balanced.prefix_counts.train : 25,544,975 systems
ddss_stability_balanced.prefix_counts.valid.final : 10,000 systems
ddss_stability_balanced.prefix_counts.test.final : 10,000 systems

Stability : random sample of systems of degree 2 to 6, predicting speed of convergence at 0.01

in archive https://dl.fbaipublicfiles.com/MathsFromExamples/data/ddss_stability.tar.gz

ddss_stability.prefix_counts.train : 92,994,423 systems
ddss_stability.prefix_counts.valid.final : 10,000 systems
ddss_stability.prefix_counts.test.final : 10,000 systems

Controllability: balanced sample of systems of degree 3 to 5 (50% stable), predicting controllability (a binary value)

in archive https://dl.fbaipublicfiles.com/MathsFromExamples/data/ddss_control.tar.gz

ddss_control.prefix_counts.train : 26,577,934 systems
ddss_control.prefix_counts.valid.final : 10,000 systems
ddss_control.prefix_counts.test.final : 10,000 systems

Controllability: sample of controllable systems of degree 3 to 6, predicting a control matrix

in archive https://dl.fbaipublicfiles.com/MathsFromExamples/data/ddss_gram.tar.gz

ddss_gram.prefix_counts.train : 53,680,092 systems
ddss_gram.prefix_counts.valid.final : 10,000 systems
ddss_gram.prefix_counts.test.final : 10,000 systems

Non autonomous controllability: random sample (82.4% controllable) of systems of degree 2 and 3, predicting controllability

in archive https://dl.fbaipublicfiles.com/MathsFromExamples/data/ddss_control_t.tar.gz

ddss_control_t.prefix_counts.train : 65,754,655 systems
ddss_control_t.prefix_counts.valid.final : 10,000 systems
ddss_control_t.prefix_counts.test.final : 10,000 systems

Non autonomous controllability: balanced sample (50/50) of systems of degree 2 and 3, predicting controllability

in archive https://dl.fbaipublicfiles.com/MathsFromExamples/data/ddss_control_t_bal.tar.gz

ddss_control_t_bal.prefix_counts.train : 23,125,016 systems
ddss_control_t_bal.prefix_counts.valid.final : 10,000 systems
ddss_control_t_bal.prefix_counts.test.final : 10,000 systems

Partial differential equations with initial conditions, predicting existence of a solution and behavior at infinity

in archive https://dl.fbaipublicfiles.com/MathsFromExamples/data/ddss_fourier.tar.gz

ddss_fourier.prefix_counts.train : 52,285,760 systems
ddss_fourier.prefix_counts.valid.final : 10,000 systems
ddss_fourier.prefix_counts.test.final : 10,000 systems

Training a model from a dataset

python train.py 

# experiment parameters 
# the full path of this experiment will be /checkpoint/fcharton/dumped/ddss_ctrl/exp_1
--dump_path '/checkpoint/fcharton/dumped'   # path for log files and saved models, avoid ./ and other non absolute paths
--exp_name ddss_ctrl                        # name
--exp_id exp_1                              # id : randomly generated if absent

# dataset
--export_data false
--tasks ode_control         # set to `ode_convergence_speed`, `ode_control` or `fourier_cond_init`
# '{tasks},{train_file_path},{valid_file_path},{test_file_path}'
--reload_data 'ode_control,/checkpoint/fcharton/dumped/ddss_gen_ctrl/ddss_control.prefix_counts.train,/checkpoint/fcharton/dumped/ddss_gen_ctrl/ddss_control.prefix_counts.valid.final,/checkpoint/fcharton/dumped/ddss_gen_ctrl/ddss_control.prefix_counts.test.final' 
--reload_size 40000000      # nr of records to load
--max_len 512               # max length of input or output

# model parameters
--emb_dim 512 
--n_enc_layers 6 
--n_dec_layers 6 
--n_heads 8 
--optimizer 'adam_inverse_sqrt,warmup_updates=10000,lr=0.0001,weight_decay=0.01'

# training parameters
--batch_size 256        # minibatch size, reduce to fit available GPU memory
--epoch_size 300000     # how often evaluation on validation set is performed
--beam_eval 0           # use beam search for evaluation (set to 1 for quantitative tasks)
--eval_size 10000       # size of validation set
--batch_size_eval 256   # batchs for validation, reduce to adjust memory

# validation metrics
# valid_{task}_acc or valid_{task}_beam_acc depending on whether beam search is used  
--validation_metrics valid_ode_control_acc 
# stop after no increase in 20 epochs
--stopping_criterion 'valid_ode_control_acc,20'

Generating your own data sets

To generate a dataset, use the parameters

python train.py --cpu true --export_data true  --reload_data '' --env_base_seed -1  --num_workers 20 --task # task specific parameters

Generated data (exported as sequences of tokens) will be written in file data.prefix in the dump path of the experiment. To be used for training, these files need to be post-processed as shown in the examples below.

IMPORTANT NOTE : Data generation is very slow, and sometimes results in errors that cause the program to abort and need to be relaunched. Typical generating speeds are one or a few systems per second. Whereas one might want to use this code to experiment with data generation, creating datasets on which our models can be trained (10 million examples or more) requires a lot of computing power (typically 200-300 experiments, with 20 CPU each, running for several days)

Important parameters for data generation are :

--tasks : ode_convergence_speed, ode_control or fourier_cond_init
--cpu : always set to true
--num_workers : set to the number of cores you can use
--env_base_seed : set to -1
--min_degree and --max_degree : bounds for the size of the systems generated
For more details, see file 'envs/ode.py' in the source code

Predicting stability - balanced sample (50% stable), systems of degree 2 to 5

# Generation command
python train.py --dump_path '/checkpoint/fcharton/dumped' --save_periodic 0 --fp16 false --amp -1 --emb_dim 128 --n_enc_layers 2 --n_dec_layers 2 --n_heads 8 --dropout 0 --attention_dropout 0 --share_inout_emb true --sinusoidal_embeddings false --max_len 512 --batch_size 32 --optimizer 'adam,lr=0.0001' --clip_grad_norm 5 --epoch_size 300000 --max_epoch 100000 --accumulate_gradients 1 --env_name ode --max_int 10 --precision 2 --skip_zero_gradient true --positive false --nonnull true --prob_int 0.3 --min_degree 2 --max_degree 5 --eval_value 0.01 --prob_positive 0.5 --num_workers 20 --cpu true --stopping_criterion '' --validation_metrics '' --export_data true --reload_data '' --tasks ode_convergence_speed --env_base_seed -1 --exp_name ddss_gen_stab_bal

# Post-processing
# assemble raw data file from prefixes
cat */data.prefix \
| awk 'BEGIN{PROCINFO["sorted_in"]="@val_num_desc"}{c[$0]++}END{for (i in c) printf("%i|%s\n",c[i],i)}' \
> ddss_stability_balanced.prefix_counts

# create train, valid and test samples
python ~/MathsFromExamples/split_data.py ddss_stability_balanced.prefix_counts 10000

# check valid and test for duplicates and remove them
awk -F"[|\t]" 'NR==FNR { lines[$2]=1; next } !($2 in lines)' ddss_stability_balanced.prefix_counts.train ddss_stability_balanced.prefix_counts.valid > ddss_stability_balanced.prefix_counts.valid.final
awk -F"[|\t]" 'NR==FNR { lines[$2]=1; next } !($2 in lines)' ddss_stability_balanced.prefix_counts.train ddss_stability_balanced.prefix_counts.test > ddss_stability_balanced.prefix_counts.test.final

Predicting stability - random sample, systems of degree 2 to 6

# Generation command
python train.py --dump_path '/checkpoint/fcharton/dumped' --save_periodic 0 --fp16 false --amp -1 --emb_dim 128 --n_enc_layers 2 --n_dec_layers 2 --n_heads 8 --dropout 0 --attention_dropout 0 --share_inout_emb true --sinusoidal_embeddings false --max_len 512 --batch_size 32 --optimizer 'adam,lr=0.0001' --clip_grad_norm 5 --epoch_size 300000 --max_epoch 100000 --accumulate_gradients 1 --env_name ode --max_int 10 --precision 2 --skip_zero_gradient true --positive false --nonnull true --prob_int 0.3 --min_degree 2 --max_degree 6 --eval_value 0.01 --num_workers 20 --cpu true --stopping_criterion '' --validation_metrics '' --export_data true --reload_data '' --tasks ode_convergence_speed --env_base_seed -1 --exp_name ddss_gen_stab

# assemble raw data file from prefixes
cat */data.prefix \
| awk 'BEGIN{PROCINFO["sorted_in"]="@val_num_desc"}{c[$0]++}END{for (i in c) printf("%i|%s\n",c[i],i)}' \
> ddss_stability.prefix_counts
 
# create train, valid and test samples 
python ~/MathsFromExamples/split_data.py ddss_stability.prefix_counts 10000

# check valid and test for duplicates and remove them
awk -F"[|\t]" 'NR==FNR { lines[$2]=1; next } !($2 in lines)' ddss_stability.prefix_counts.train ddss_stability.prefix_counts.valid > ddss_stability.prefix_counts.valid.final
awk -F"[|\t]" 'NR==FNR { lines[$2]=1; next } !($2 in lines)' ddss_stability.prefix_counts.train ddss_stability.prefix_counts.test > ddss_stability.prefix_counts.test.final

Predicting controllability - balanced sample, systems of degree 3 to 6

# generation command 
python train.py --dump_path '/checkpoint/fcharton/dumped' --save_periodic 0 --fp16 false --amp -1 --emb_dim 128 --n_enc_layers 2 --n_dec_layers 2 --n_heads 8 --dropout 0 --attention_dropout 0 --share_inout_emb true --sinusoidal_embeddings false --max_len 512 --batch_size 32 --optimizer 'adam,lr=0.0001' --clip_grad_norm 5 --epoch_size 300000 --max_epoch 100000 --accumulate_gradients 1 --env_name ode --max_int 10 --precision 3 --skip_zero_gradient true --positive false --nonnull true --prob_int 0.3 --min_degree 3 --max_degree 6 --eval_value 0.9 --allow_complex false --jacobian_precision 3 --qualitative true --num_workers 20 --cpu true --stopping_criterion '' --validation_metrics '' --export_data true --reload_data '' --tasks ode_control --env_base_seed -1 --exp_name ddss_gen_ctrl

# assemble non controllable cases from prefixes
cat */data.prefix \
| grep '0$' \
| awk 'BEGIN{PROCINFO["sorted_in"]="@val_num_desc"}{c[$0]++}END{for (i in c) printf("%i|%s\n",c[i],i)}' \
> ddss_control.prefix_counts.0

# count them
wc -l ddss_control.prefix_counts.0   # 13,298,967

# assemble controllable cases from prefixes
cat */data.prefix \
| grep '1$' \
| awk 'BEGIN{PROCINFO["sorted_in"]="@val_num_desc"}{c[$0]++}END{for (i in c) printf("%i|%s\n",c[i],i)}' \
| head -n 13298967 > ddss_control.prefix_counts.1

# assemble prefix_counts
cat ddss_control.prefix_counts.0 ddss_control.prefix_counts.1 | shuf > ddss_control.prefix_counts

# create train, valid and test samples
python ~/MathsFromExamples/split_data.py ddss_control.prefix_counts 10000

# check valid and test for duplicates and remove them
awk -F"[|\t]" 'NR==FNR { lines[$2]=1; next } !($2 in lines)' ddss_control.prefix_counts.train ddss_control.prefix_counts.valid > ddss_control.prefix_counts.valid.final
awk -F"[|\t]" 'NR==FNR { lines[$2]=1; next } !($2 in lines)' ddss_control.prefix_counts.train ddss_control.prefix_counts.test > ddss_control.prefix_counts.test.final

Predicting non autonomous controllability: unbalanced sample, systems of 2 to 3 equations

# generation command 
python train.py --dump_path '/checkpoint/fcharton/dumped' --save_periodic 0 --fp16 false --amp -1 --emb_dim 128 --n_enc_layers 2 --n_dec_layers 2 --n_heads 8 --dropout 0 --attention_dropout 0 --share_inout_emb true --sinusoidal_embeddings false --max_len 512 --batch_size 32 --optimizer 'adam,lr=0.0001' --clip_grad_norm 5 --epoch_size 300000 --max_epoch 100000 --accumulate_gradients 1 --env_name ode --max_int 10 --precision 3 --skip_zero_gradient true --positive false --nonnull true --prob_int 0.3 --min_degree 2 --max_degree 3 --eval_value 0.5 --allow_complex false --jacobian_precision 3 --qualitative false --tau 1 --num_workers 20 --cpu true --stopping_criterion '' --validation_metrics '' --export_data true --reload_data '' --tasks ode_control --env_base_seed -1 --exp_name ddss_gen_ctrl_t

# assemble raw data file from prefixes
cat */data.prefix \
| awk 'BEGIN{PROCINFO["sorted_in"]="@val_num_desc"}{c[$0]++}END{for (i in c) printf("%i|%s\n",c[i],i)}' \
> ddss_control_t.prefix_counts

# create train, valid and test samples
python ~/MathsFromExamples/split_data.py ddss_control_t.prefix_counts 10000

# check valid and test for duplicates and remove them
awk -F"[|\t]" 'NR==FNR { lines[$2]=1; next } !($2 in lines)' ddss_control_t.prefix_counts.train ddss_control_t.prefix_counts.valid > ddss_control_t.prefix_counts.valid.final
awk -F"[|\t]" 'NR==FNR { lines[$2]=1; next } !($2 in lines)' ddss_control_t.prefix_counts.train ddss_control_t.prefix_counts.test > ddss_control_t.prefix_counts.test.final

Predicting non autonomous controllability: balanced sample, systems of 2 to 3 equations

# generation command 
python train.py --dump_path '/checkpoint/fcharton/dumped' --save_periodic 0 --fp16 false --amp -1 --emb_dim 128 --n_enc_layers 2 --n_dec_layers 2 --n_heads 8 --dropout 0 --attention_dropout 0 --share_inout_emb true --sinusoidal_embeddings false --max_len 512 --batch_size 32 --optimizer 'adam,lr=0.0001' --clip_grad_norm 5 --epoch_size 300000 --max_epoch 100000 --accumulate_gradients 1 --env_name ode --max_int 10 --precision 3 --skip_zero_gradient true --positive false --nonnull true --prob_int 0.3 --min_degree 2 --max_degree 3 --eval_value 0.5 --allow_complex false --jacobian_precision 3 --qualitative false --tau 1 --num_workers 20 --cpu true --stopping_criterion '' --validation_metrics '' --export_data true --reload_data '' --tasks ode_control --env_base_seed -1 --exp_name ddss_gen_ctrl_t

# assemble non controllable cases from prefixes
cat */data.prefix \
| grep '0$' \
| awk 'BEGIN{PROCINFO["sorted_in"]="@val_num_desc"}{c[$0]++}END{for (i in c) printf("%i|%s\n",c[i],i)}' \
> ddss_control_t.prefix_counts.0

# count them
wc -l ddss_control_t.prefix_counts.0   # 11,572,508

# assemble controllable cases from prefixes
cat */data.prefix \
| grep '1$' \
| awk 'BEGIN{PROCINFO["sorted_in"]="@val_num_desc"}{c[$0]++}END{for (i in c) printf("%i|%s\n",c[i],i)}' \
| head -n 11572508 > ddss_control_t.prefix_counts.1

# assemble prefix_counts
cat ddss_control_t.prefix_counts.0 ddss_control_t.prefix_counts.1 | shuf > ddss_control_t_bal.prefix_counts

# create train, valid and test samples
python ~/MathsFromExamples/split_data.py ddss_control_t_bal.prefix_counts 10000

# check valid and test for duplicates and remove them
awk -F"[|\t]" 'NR==FNR { lines[$2]=1; next } !($2 in lines)' ddss_control_t_bal.prefix_counts.train ddss_control_t_bal.prefix_counts.valid > ddss_control_t_bal.prefix_counts.valid.final
awk -F"[|\t]" 'NR==FNR { lines[$2]=1; next } !($2 in lines)' ddss_control_t_bal.prefix_counts.train ddss_control_t_bal.prefix_counts.test > ddss_control_t_bal.prefix_counts.test.final

Predicting control matrices - sample of controllable systems, of degree 3 to 6

# generation command
python train.py --dump_path '/checkpoint/fcharton/dumped' --save_periodic 0 --fp16 false --amp -1 --emb_dim 128 --n_enc_layers 2 --n_dec_layers 2 --n_heads 8 --dropout 0 --attention_dropout 0 --share_inout_emb true --sinusoidal_embeddings false --max_len 512 --batch_size 32 --optimizer 'adam,lr=0.0001' --clip_grad_norm 5 --epoch_size 300000 --max_epoch 100000 --accumulate_gradients 1 --env_name ode --max_int 10 --precision 3 --skip_zero_gradient true --positive false --nonnull true --prob_int 0.3 --min_degree 3 --max_degree 6 --eval_value 0.5 --allow_complex false --jacobian_precision 2 --qualitative false --predict_gramian true --prob_positive 1.0 --num_workers 20 --cpu true --stopping_criterion '' --validation_metrics '' --export_data true --reload_data '' --tasks ode_control --env_base_seed -1 --exp_name ddss_gen_gram

# assemble raw data file from prefixes
cat */data.prefix \
| awk 'BEGIN{PROCINFO["sorted_in"]="@val_num_desc"}{c[$0]++}END{for (i in c) printf("%i|%s\n",c[i],i)}' \
> ddss_gram.prefix_counts
 
# create train, valid and test samples 
python ~/MathsFromExamples/split_data.py ddss_gram.prefix_counts 10000

# check valid and test for duplicates and remove them
awk -F"[|\t]" 'NR==FNR { lines[$2]=1; next } !($2 in lines)' ddss_gram.prefix_counts.train ddss_gram.prefix_counts.valid > ddss_gram.prefix_counts.valid.final
awk -F"[|\t]" 'NR==FNR { lines[$2]=1; next } !($2 in lines)' ddss_gram.prefix_counts.train ddss_gram.prefix_counts.test > ddss_gram.prefix_counts.test.final

Predicting the existence of solutions of partial differential equations

# generation command
python train.py --dump_path '/checkpoint/fcharton/dumped' --save_periodic 0 --fp16 false --amp -1 --emb_dim 128 --n_enc_layers 2 --n_dec_layers 2 --n_heads 8 --dropout 0 --attention_dropout 0 --share_inout_emb true --sinusoidal_embeddings false --max_len 512 --batch_size 32 --optimizer 'adam,lr=0.0001' --clip_grad_norm 5 --epoch_size 300000 --max_epoch 100000 --accumulate_gradients 1 --env_name ode --max_int 10 --precision 2 --jacobian_precision 2 --positive false --nonnull true --allow_complex false --predict_bounds true --skip_zero_gradient true --prob_int 0.3 --min_degree 2 --max_degree 6 --eval_value 0.01 --prob_positive -1.0 --num_workers 20 --cpu true --stopping_criterion '' --validation_metrics '' --export_data true --reload_data '' --tasks fourier_cond_init --env_base_seed -1 --exp_name ddss_gen_fourier

# assemble raw data file from prefixes
cat */data.prefix \
| awk 'BEGIN{PROCINFO["sorted_in"]="@val_num_desc"}{c[$0]++}END{for (i in c) printf("%i|%s\n",c[i],i)}' \
> ddss_fourier.prefix_counts
 
# create train, valid and test samples 
python ~/MathsFromExamples/split_data.py ddss_fourier.prefix_counts 10000

# check valid and test for duplicates and remove them
awk -F"[|\t]" 'NR==FNR { lines[$2]=1; next } !($2 in lines)' ddss_fourier.prefix_counts.train ddss_fourier.prefix_counts.valid > ddss_fourier.prefix_counts.valid.final
awk -F"[|\t]" 'NR==FNR { lines[$2]=1; next } !($2 in lines)' ddss_fourier.prefix_counts.train ddss_fourier.prefix_counts.test > ddss_fourier.prefix_counts.test.final

Pre-trained models

We provide 7 pretrained models for the various problems. Below are the links, the dataset they were trained on, and the parameters used, and the performance on the validation set (valid.final in the same directory, 10 000 held-out examples).

Predicting stability (qualitative)

Model: https://dl.fbaipublicfiles.com/MathsFromExamples/models/ddss_stab_quali.pth
Training set: ddss_stability_balanced.prefix_counts.train
Accuracy over validation set: 97.1%
Training parameters (command line)

python train.py --dump_path '/checkpoint/fcharton/dumped' --save_periodic 0 --fp16 true --amp 2 --accumulate_gradients 1 --emb_dim 512 --batch_size 128 --batch_size_eval 256 --n_enc_layers 6 --n_dec_layers 6 --n_heads 8 --dropout 0 --attention_dropout 0 --share_inout_emb true --sinusoidal_embeddings false --max_len 512 --optimizer 'adam,lr=0.0001' --clip_grad_norm 5 --epoch_size 300000 --max_epoch 100000 --num_workers 1 --export_data false --env_name ode --max_int 10 --positive false --nonnull true --qualitative true --skip_zero_gradient true --prob_int 0.3 --max_degree 5 --min_degree 2 --eval_verbose 0 --beam_eval 0 --eval_size 10000 --tasks ode_convergence_speed --reload_data 'ode_convergence_speed,/checkpoint/fcharton/dumped/ddss_gen_stab_bal/ddss_stability_balanced.prefix_counts.train,/checkpoint/fcharton/dumped/ddss_gen_stab_bal/ddss_stability_balanced.prefix_counts.valid.final,/checkpoint/fcharton/dumped/ddss_gen_stab_bal/ddss_stability_balanced.prefix_counts.test.final' --reload_size 40000000 --stopping_criterion 'valid_ode_convergence_speed_acc,40' --validation_metrics valid_ode_convergence_speed_acc --env_base_seed -1 --exp_name ddss_stab_quali

Stability: computing convergence speed

Model: https://dl.fbaipublicfiles.com/MathsFromExamples/models/ddss_stab_quanti.pth
Training set:ddss_stability.prefix_counts.train
Accuracy over validation set: 87.4%
Training parameters (command line)

python train.py --dump_path '/checkpoint/fcharton/dumped' --save_periodic 0 --fp16 true --amp 2 --accumulate_gradients 1 --emb_dim 1024 --batch_size 128 --batch_size_eval 256 --n_enc_layers 8 --n_dec_layers 8 --n_heads 8 --dropout 0 --attention_dropout 0 --share_inout_emb true --sinusoidal_embeddings false --max_len 512 --optimizer 'adam_inverse_sqrt,warmup_updates=10000,lr=0.0001,weight_decay=0.01' --clip_grad_norm 5 --epoch_size 300000 --max_epoch 100000 --num_workers 1 --export_data false --env_name ode --max_int 10 --positive false --nonnull true --skip_zero_gradient true --prob_int 0.3 --max_degree 6 --min_degree 2 --eval_verbose 0 --beam_eval 1 --eval_size 10000 --tasks ode_convergence_speed --reload_data 'ode_convergence_speed,/checkpoint/fcharton/dumped/ddss_gen_stab/ddss_stability.prefix_counts.train,/checkpoint/fcharton/dumped/ddss_gen_stab/ddss_stability.prefix_counts.valid.final,/checkpoint/fcharton/dumped/ddss_gen_stab/ddss_stability.prefix_counts.test.final' --reload_size 40000000 --stopping_criterion 'valid_ode_convergence_speed_beam_acc,40' --validation_metrics valid_ode_convergence_speed_beam_acc --env_base_seed -1 --exp_name ddss_stab_quanti

Predicting autonomous controllability

Model: https://dl.fbaipublicfiles.com/MathsFromExamples/models/ddss_ctrl.pth
Training set: ddss_control.prefix_counts.train
Accuracy over validation set: 97.4%
Training parameters (command line)

 python train.py --dump_path '/checkpoint/fcharton/dumped' --save_periodic 0 --fp16 true --amp 2 --accumulate_gradients 1 --emb_dim 512 --batch_size 256 --batch_size_eval 256 --n_enc_layers 6 --n_dec_layers 6 --n_heads 8 --dropout 0 --attention_dropout 0 --share_inout_emb true --sinusoidal_embeddings false --max_len 512 --optimizer 'adam_inverse_sqrt,warmup_updates=10000,lr=0.0001,weight_decay=0.01' --clip_grad_norm 5 --epoch_size 300000 --max_epoch 100000 --num_workers 1 --export_data false --env_name ode --max_int 10 --positive false --nonnull true --skip_zero_gradient true --prob_int 0.3 --max_degree 6 --min_degree 3 --eval_value 0.9 --qualitative true --eval_verbose 0 --beam_eval 0 --eval_size 10000 --tasks ode_control --reload_data 'ode_control,/checkpoint/fcharton/dumped/ddss_gen_ctrl/ddss_control.prefix_counts.train,/checkpoint/fcharton/dumped/ddss_gen_ctrl/ddss_control.prefix_counts.valid.final,/checkpoint/fcharton/dumped/ddss_gen_ctrl/ddss_control.prefix_counts.test.final' --reload_size 40000000 --stopping_criterion 'valid_ode_control_acc,20' --validation_metrics valid_ode_control_acc --env_base_seed -1 --exp_name ddss_ctrl

Predicting non-autonomous controllability

Model: https://dl.fbaipublicfiles.com/MathsFromExamples/models/ddss_ctrl_t.pth
Training set: ddss_control_t.prefix_counts.train
Accuracy over validation set: 99.6%
Training parameters (command line)

python train.py --dump_path '/checkpoint/fcharton/dumped' --save_periodic 0 --fp16 true --amp 2 --accumulate_gradients 1 --emb_dim 512 --batch_size 256 --batch_size_eval 256 --n_enc_layers 6 --n_dec_layers 6 --n_heads 8 --dropout 0 --attention_dropout 0 --share_inout_emb true --sinusoidal_embeddings false --max_len 512 --optimizer 'adam_inverse_sqrt,warmup_updates=10000,lr=0.0001,weight_decay=0.01' --clip_grad_norm 5 --epoch_size 300000 --max_epoch 100000 --num_workers 1 --export_data false --env_name ode --max_int 10 --positive false --nonnull true --skip_zero_gradient true --prob_int 0.3 --max_degree 3 --min_degree 2 --eval_value 0.5 --qualitative false --tau 1 --eval_verbose 0 --beam_eval 0 --eval_size 10000 --tasks ode_control --reload_data 'ode_control,/checkpoint/fcharton/dumped/ddss_gen_ctrl_t/ddss_control_t.prefix_counts.train,/checkpoint/fcharton/dumped/ddss_gen_ctrl_t/ddss_control_t.prefix_counts.valid.final,/checkpoint/fcharton/dumped/ddss_gen_ctrl_t/ddss_control_t.prefix_counts.test.final' --reload_size 40000000 --stopping_criterion 'valid_ode_control_acc,60' --validation_metrics valid_ode_control_acc --env_base_seed -1 --exp_name ddss_ctrl_t

Computing control matrices: predicting solution up to 10%

Model: https://dl.fbaipublicfiles.com/MathsFromExamples/models/ddss_gram_approx.pth
Training set: ddss_gram.prefix_counts.train
Accuracy over validation set: 24.5%
Training parameters (command line)

python /private/home/fcharton/workdir/ddss_gram/2021_03_18_12_05_11/train.py --dump_path '/checkpoint/fcharton/dumped' --save_periodic 0 --fp16 true --amp 2 --accumulate_gradients 1 --emb_dim 512 --batch_size 128 --batch_size_eval 128 --n_enc_layers 6 --n_dec_layers 6 --n_heads 8 --dropout 0 --attention_dropout 0 --share_inout_emb true --sinusoidal_embeddings false --max_len 512 --optimizer 'adam,lr=0.0001' --clip_grad_norm 5 --epoch_size 300000 --max_epoch 100000 --num_workers 1 --export_data false --env_name ode --max_int 10 --positive false --nonnull true --skip_zero_gradient true --prob_int 0.3 --max_degree 6 --min_degree 3 --eval_value 0.5 --predict_gramian true --euclidian_metric true --auxiliary_task false --eval_verbose 0 --beam_eval 1 --eval_size 10000 --tasks ode_control --reload_data 'ode_control,/checkpoint/fcharton/dumped/ddss_gen_gram/ddss_gram.prefix_counts.train,/checkpoint/fcharton/dumped/ddss_gen_gram/ddss_gram.prefix_counts.valid.final,/checkpoint/fcharton/dumped/ddss_gen_gram/ddss_gram.prefix_counts.test.final' --reload_size 50000000 --stopping_criterion 'valid_ode_control_beam_acc,40' --validation_metrics valid_ode_control_beam_acc --env_base_seed -1 --exp_name ddss_gram

Computing control matrices: predicting a correct mathematical solution

Model: https://dl.fbaipublicfiles.com/MathsFromExamples/models/ddss_gram_math.pth
Training set: ddss_gram.prefix_counts.train
Accuracy over validation set: 63.5%
Training parameters (command line)

python /private/home/fcharton/workdir/ddss_gram/2021_03_09_12_09_38/train.py --dump_path '/checkpoint/fcharton/dumped' --save_periodic 0 --fp16 true --amp 2 --accumulate_gradients 1 --emb_dim 512 --batch_size 128 --batch_size_eval 128 --n_enc_layers 6 --n_dec_layers 6 --n_heads 8 --dropout 0 --attention_dropout 0 --share_inout_emb true --sinusoidal_embeddings false --max_len 512 --optimizer 'adam,lr=0.0001' --clip_grad_norm 5 --epoch_size 300000 --max_epoch 100000 --num_workers 1 --export_data false --env_name ode --max_int 10 --positive false --nonnull true --skip_zero_gradient true --prob_int 0.3 --max_degree 6 --min_degree 3 --eval_value 0.5 --predict_gramian true --euclidian_metric false --auxiliary_task false --eval_verbose 0 --beam_eval 1 --eval_size 10000 --tasks ode_control --reload_data 'ode_control,/checkpoint/fcharton/dumped/ddss_gen_gram/ddss_gram.prefix_counts.train,/checkpoint/fcharton/dumped/ddss_gen_gram/ddss_gram.prefix_counts.valid.final,/checkpoint/fcharton/dumped/ddss_gen_gram/ddss_gram.prefix_counts.test.final' --reload_size 40000000 --stopping_criterion 'valid_ode_control_beam_acc,20' --validation_metrics valid_ode_control_beam_acc --env_base_seed -1 --exp_name ddss_gram

Predicting the existence of solutions of partial differential equations

Model: https://dl.fbaipublicfiles.com/MathsFromExamples/models/ddss_fourier.pth
Training set: ddss_fourier.prefix_counts.train
Accuracy over validation set: 98.6%
Training parameters (command line)

python train.py --dump_path '/checkpoint/fcharton/dumped' --save_periodic 0 --fp16 false --amp -1 --accumulate_gradients 1 --emb_dim 512 --n_enc_layers 8 --n_dec_layers 8 --batch_size 64 --batch_size_eval 64 --eval_size 10000 --predict_jacobian false --n_heads 8 --dropout 0 --attention_dropout 0 --share_inout_emb true --sinusoidal_embeddings false --max_len 1024 --optimizer 'adam_inverse_sqrt,warmup_updates=10000,lr=0.0001,weight_decay=0.01' --clip_grad_norm 5 --epoch_size 300000 --max_epoch 100000 --num_workers 1 --export_data false --env_name ode --max_int 10 --precision 3 --jacobian_precision 1 --positive false --nonnull true --prob_int '0.3' --max_degree 6 --eval_value 0.5 --allow_complex false --predict_bounds true --skip_zero_gradient true --eval_verbose 0 --beam_eval 0 --tasks fourier_cond_init --reload_data 'fourier_cond_init,/checkpoint/fcharton/dumped/ddss_gen_fourier/ddss_fourier.prefix_counts.train,/checkpoint/fcharton/dumped/ddss_gen_fourier/ddss_fourier.prefix_counts.valid,/checkpoint/fcharton/dumped/ddss_gen_fourier/ddss_fourier.prefix_counts.test' --reload_size 40000000 --stopping_criterion 'valid_fourier_cond_init_acc,20' --validation_metrics valid_fourier_cond_init_acc --env_base_seed -1 --exp_name ddss_fourier

Evaluating trained models

To evaluate over a trained model model.pth on a specific test set test.data, run the model with the same parameters as training, setting --eval_only trueand --reload_model to the path to your model (e.g. --reload_model /model_path/model.pth), and setting the second file --reload_datato your test data (e.g. --reload_data 'ode_control,/checkpoint/fcharton/dumped/ddss_gen_gram/ddss_gram.prefix_counts.train,/MYPATH/test.data,/checkpoint/fcharton/dumped/ddss_gen_gram/ddss_gram.prefix_counts.test.final'). Set --eval_sizeto the size of your dataset. At present, only the validation dataset is used for evaluation, but you can change this by toggling comments on lines 367 and 368 of file evaluator.py.

Citation

This code is released under a Creative Commons License, see LICENCE file for more details. If you use this code, consider citing

@misc{charton2021learning, title={Learning advanced mathematical computations from examples}, author={François Charton and Amaury Hayat and Guillaume Lample}, year={2021}, eprint={2006.06462}, archivePrefix={arXiv}, primaryClass={cs.LG} }

Source code, datasets and trained models for the paper Learning Advanced Mathematical Computations from Examples (ICLR 2021), by François Charton, Amaury Hayat (ENPC-Rutgers) and Guillaume Lample

Related tags

Overview

Maths from examples - Learning advanced mathematical computations from examples

Dependencies

Important notes

Learning with and without GPU

Dump paths and experiment names

Data sets

Stability : balanced sample of systems of degree 2 to 5 (50% stable), predicting speed of convergence at 0.01 (largest real part of eigenvalue):

Stability : random sample of systems of degree 2 to 6, predicting speed of convergence at 0.01

Controllability: balanced sample of systems of degree 3 to 5 (50% stable), predicting controllability (a binary value)

Controllability: sample of controllable systems of degree 3 to 6, predicting a control matrix

Non autonomous controllability: random sample (82.4% controllable) of systems of degree 2 and 3, predicting controllability

Non autonomous controllability: balanced sample (50/50) of systems of degree 2 and 3, predicting controllability

Partial differential equations with initial conditions, predicting existence of a solution and behavior at infinity

Training a model from a dataset

Generating your own data sets

Predicting stability - balanced sample (50% stable), systems of degree 2 to 5

Predicting stability - random sample, systems of degree 2 to 6

Predicting controllability - balanced sample, systems of degree 3 to 6

Predicting non autonomous controllability: unbalanced sample, systems of 2 to 3 equations

Predicting non autonomous controllability: balanced sample, systems of 2 to 3 equations

Predicting control matrices - sample of controllable systems, of degree 3 to 6

Predicting the existence of solutions of partial differential equations

Pre-trained models

Predicting stability (qualitative)

Stability: computing convergence speed

Predicting autonomous controllability

Predicting non-autonomous controllability

Computing control matrices: predicting solution up to 10%

Computing control matrices: predicting a correct mathematical solution

Predicting the existence of solutions of partial differential equations

Evaluating trained models

Citation

Owner

Facebook Research

A sample pytorch Implementation of ACL 2021 research paper "Learning Span-Level Interactions for Aspect Sentiment Triplet Extraction".

[ECCV 2020] XingGAN for Person Image Generation

PyTorch implementation of residual gated graph ConvNets, ICLR’18

Artificial Neural network regression model to predict the energy output in a combined cycle power plant.

Genetic Algorithm, Particle Swarm Optimization, Simulated Annealing, Ant Colony Optimization Algorithm,Immune Algorithm, Artificial Fish Swarm Algorithm, Differential Evolution and TSP(Traveling salesman)

VOS: Learning What You Don’t Know by Virtual Outlier Synthesis

A Comparative Framework for Multimodal Recommender Systems

This is the code related to "Sparse-to-dense Feature Matching: Intra and Inter domain Cross-modal Learning in Domain Adaptation for 3D Semantic Segmentation" (ICCV 2021).

Official Repository for "Robust On-Policy Data Collection for Data Efficient Policy Evaluation" (NeurIPS 2021 Workshop on OfflineRL).

FAST Aiming at the problems of cumbersome steps and slow download speed of GNSS data

DeepLabv3+：Encoder-Decoder with Atrous Separable Convolution语义分割模型在tensorflow2当中的实现

An end-to-end machine learning web app to predict rugby scores (Pandas, SQLite, Keras, Flask, Docker)

Code release for our paper, "SimNet: Enabling Robust Unknown Object Manipulation from Pure Synthetic Data via Stereo"

f-BRS: Rethinking Backpropagating Refinement for Interactive Segmentation

Jupyter notebooks for the code samples of the book "Deep Learning with Python"

2021 National Underwater Robotics Vision Optics

Joint Unsupervised Learning (JULE) of Deep Representations and Image Clusters.

StyleGAN-NADA: CLIP-Guided Domain Adaptation of Image Generators

Official source code of paper 'IterMVS: Iterative Probability Estimation for Efficient Multi-View Stereo'

Pixel Consensus Voting for Panoptic Segmentation (CVPR 2020)