A refreshed Python toolbox for building complex digital hardware

RaspberryPi Spotify OLED Display This application will display currently played track on SSD1306 OLED display connected to RaspberryPi. Displayed stuf

PlatformIO development platform for GSM modules Supported Modules Quectel M66 OpenCPU Arduino - TODO other - in progress... Supported Boards Comet M66

Toy Robot Challenge - Release Notes November 12, 2021 New features Initialisation - Users can set the home position and heading of the robot. Position

Brogrammer Keyboard Firmware The package contains the firmware that runs on the Brogrammer Keyboard v1.0 See https://imgur.com/a/oY5QZ14 This keyboard

Phomemo M02S Python library This is a basic Python library for controlling the Phomemo M02S bluetooth thermal printer. It probably only works on Mac &

Control Raspberry pi with physically attached button. Wake, Power Off, and Restart (Double Press) . Python3 script runs as a service with easy installation.

Onshape_Macropad Code for the onshape macropad. This is a macropad built using the Pimoroni Keybow and the KPrepublic Enclosure. pimoroni_keybow kprep

MQTT-GPIO A python script to poll RPi GPIO pins and subscribe and publish their state via MQTT using TLS. This script is short and meant to be edited

sticklog2heatmap Draw a heatmap of RC sticks from OpenTX logs or USB HID device

OpenStickFirmware is open source software designed to handle any and all tasks required in a custom Fight Stick. It can handle being the brains of your entire stick, or just handling the bells and wh

A number of 2D waypoints will be predefined in ROS based robots to navigate to the destination avoiding obstacles.

A python script for macOS to enable scrolling with the 3M ergonomic mouse EM500GPS in any application.

A typical datarootsian consumes high-quality fresh coffee in their office environment. The board of dataroots had a very critical decision by the end of 2021-Q2 regarding coffee consumption.

Structured-light-stereo This repo uses a stereo camera and gray-code-based structured light to realize dense 3D reconstruction. . How to use: STEP 1:

HomeAssistant - Polyaire AirTouch 4 Integration Custom integration to add an AirTouch 4 AC Controller Installation: Copy contents of custom_components

A Macropad using the Raspberry Pi Pico, programmed with CircuitPython.

Python library to manipulate Ingenico mobile payment device like iCT220 or iWL220 equipped with Telium Manager. RS232/USB.

Dorna-Robotics-Internship Code In the directory "Code" is a python file which I wrote to allow the Dorna Robots API to draw an Image on a 3D plane. I

This is a simple python script that will run a docker container to pull data from Drobo. It will give information like (Name, serial, firmware, disk-total, disk-used, disk-free and individual disk st