Duke Energy Gateway This is a custom integration for Home Assistant. It pulls near-real-time energy usage from Duke Energy via the Duke Energy Gateway

This application works with serial communication. Use a simple gui to send and receive serial data from arduino and control leds and motor direction

This is a python service which enables switching between numpad and touchpad for the Asus UX433. It may work for other models.

Cat printer is a portable thermal printer sold on AliExpress for around $20. This repository contains Python code for talking to the cat printer over

Nestalarm Monitor an EnvisaLink alarm module running Honeywell firmware, and set a Nest device to Home/Away depending on whether the alarm is Disarmed

A Macropad using the Raspberry Pi Pico, programmed with CircuitPython.

Python-based-AI-Assistant I have used python functional programming to make this Ai assistant. Inspiration of project : we have seen in our daily life

Using a GNSS module (Beidou + GPS) and the mapquest static map API

Scapy Scapy is a powerful Python-based interactive packet manipulation program and library. It is able to forge or decode packets of a wide number of

e-Distribución is an energy distribution company that covers most of South Spain area. If you live in this area, you probably are able to register into their website to get some information about you

RPie-keyboard-game Rasberry Pie GPIO memory game. Press the corresponding key to the lit LED. Randem LED (general output) is lit up on rasberrypi rand

MIDI to GCODE Play a song with a FDM 3D printer. SLA printers don't have motors, so they cannot play music. Warning: Be ready to turn off the 3D print

Detic ros - A simple ROS wrapper for Detic instance segmentation using pre-trained dataset

mqtt-rf-bridge A small Python app to converse between MQTT messages and 433MHz RF signals. This acts as a bridge between Paho MQTT and rpi-rf. Require

Robot Framework keyword library wrapper for atlassian-python-api

A Python script that takes a real time stream from Enphase Envoy and publishes to a mqtt broker. This can then be used within Home Assistant or for other applications. The data updates at least once

A script for performing OTA update over BLE on ESP32

AERO - 421 Final Project Redevelopment Spacecraft Attitude, Dynamics, and Control: Simulation to determine and control a satellite's attitude in LEO.

ConnTact Software framework to enable agile robotic assembly applications. (Connect + Tactile) Overview Installation Development of framework was done

Red Light Green Light Robot The primary problem addressed by our project is robotic follower behavior i.e. maintaining distance from a moving target.