A dashboard for Raspberry Pi to display environmental weather data, rain radar, weather forecast, etc. written in Python

Overview

Weather Clock for Raspberry PI

This project is a dashboard for Raspberry Pi to display environmental weather data, rain radar, weather forecast, etc. on a connected LCD written in Python. The data is collected from local MQTT broker and also from Internet services.

drawing

Display

I used a 7inch IPS display with 1024x600 hardware resolution and HDMI input, which has a low power consumption of only 1-2 Watt which is predestinated for 24/7 operation. An RCWL-0516 doppler radar microwave motion sensor module is used to switch off the backlight when no motion has been detected for the last 10 minutes. This is for saving energy when nobody is in the room to watch the dashboard. The backlight is switched on automatically when motion is detected.

https://www.waveshare.com/wiki/7inch_HDMI_LCD

Raspberry PI

I use the Raspberry Pi Zero WH which has enough performance, a low power consumption and an HDMI connector. Also it is possible to connect it directly to the backside of the Waveshare display. Only a mini-HDMI (type C) to normal-HDMI (type A) cable is required. The whole system (RPI + display) can be powered over the USB connector and consumes in total a maximum of 4 Watt.

Software on the Raspberry PI

  • Use a 16Gbyte SD card and install Raspberry Pi OS on it
  • Configure graphics driver and resolution as described on https://www.waveshare.com/wiki/7inch_HDMI_LCD
  • Configure a static IP within your WiFi network
  • Activate SSH for remote configuration, SW update and maintainance

Install following packages used by the Python program:

  • pip install python3-utils
  • sudo apt-get install python3-pil python3-pil.imagetk
  • sudo apt-get install python3-pip -y
  • sudo pip3 install paho-mqtt

Weather Clock configuration

Please change following variables according to your location. The value for xmin and ymin can be determined with https://oms.wff.ch/calc.htm for a specific zoom level.

  • longitude = "8.900"
  • latiude = "48.800"
  • timezone = "Europe/Berlin"
  • zoom = 12
  • xmin = 2148
  • ymin = 1409

Please change following variables according to your MQTT settings:

  • mqtt_user = "*********"
  • mqtt_password = "***************"
  • mqtt_broker_address = "192.168.xxx.xxx"
  • mqtt_port = 1883
  • mqtt_topic_pressure = "/483fdabaceba/pressure"
  • mqtt_topic_outtemperature = "/483fdabaceba/temperature"
  • mqtt_topic_outhumidity = "/483fdabaceba/humidity"
  • mqtt_topic_intemperature = "/483fdabaceba/temperature"
  • mqtt_topic_inhumidity = "/483fdabaceba/humidity"

Internet services used

The program

Execute the program with: python3 ./weatherclock_rpi.py

You might also like...
An open source operating system designed primarily for the Raspberry Pi Pico, written entirely in MicroPython
An open source operating system designed primarily for the Raspberry Pi Pico, written entirely in MicroPython

PycOS An open source operating system designed primarily for the Raspberry Pi Pico, written entirely in MicroPython. "PycOS" is an combination of the

CO2Ampel - This RaspberryPi project uses weather data to estimate the share of renewable energy in the power grid

CO2Ampel This RaspberryPi project uses weather data to estimate the share of ren

A ch341dll Wrap is for using in Python 32bits windows  to access I2C SPI and MDIO (by GPIO), and Demo with display PC sreen on OLED by i2c or SPI .
A ch341dll Wrap is for using in Python 32bits windows to access I2C SPI and MDIO (by GPIO), and Demo with display PC sreen on OLED by i2c or SPI .

ch341dll_wrap_typcal_app A ch341dll Wrap is for using in Python 32bits windows to access I2C SPI and MDIO (by GPIO). In addition, I provided 3 Demo. I

Python information display framework aimed at e-ink devices
Python information display framework aimed at e-ink devices

My display, using a Raspberry Pi Zero W and Waveshare 6" e-paper hat infodisplay Modular information display framework aimed at e-ink devices. Built u

Python application, displaying currently played track from Spotify on OLED display connected via I2C
Python application, displaying currently played track from Spotify on OLED display connected via I2C

RaspberryPi Spotify OLED Display This application will display currently played track on SSD1306 OLED display connected to RaspberryPi. Displayed stuf

A Python class for controlling the Pimoroni RGB Keypad for Raspberry Pi Pico
A Python class for controlling the Pimoroni RGB Keypad for Raspberry Pi Pico

rgbkeypad A Python class for controlling the Pimoroni RGB Keypad for the Raspberry Pi Pico. Compatible with MicroPython and CircuitPython. keypad = RG

🔆 A Python module for controlling power and brightness of the official Raspberry Pi 7
🔆 A Python module for controlling power and brightness of the official Raspberry Pi 7

rpi-backlight A Python module for controlling power and brightness of the official Raspberry Pi 7" touch display. Note: This GIF was created using the

Home solar infrastructure (with Peimar Inverter) monitoring based on Raspberry Pi 3 B+ using Grafana, InfluxDB, Custom Python Collector and Shelly EM.
Home solar infrastructure (with Peimar Inverter) monitoring based on Raspberry Pi 3 B+ using Grafana, InfluxDB, Custom Python Collector and Shelly EM.

raspberry-solar-mon Home solar infrastructure (with Peimar Inverter) monitoring based on Raspberry Pi 3 B+ using Grafana, InfluxDB, Custom Python Coll

A PYTHON Library for Controlling Motors using SOLO Motor Controllers with RASPBERRY PI, Linux, windows, and more!

A PYTHON Library for Controlling Motors using SOLO Motor Controllers with RASPBERRY PI, Linux, windows, and more!

Releases(v1.0.0)
  • v1.0.0(May 1, 2022)

Owner
Markus Geiger
SW developer
Markus Geiger
An embedded application for toy-car controlling based on Raspberry Pi 3 Model B and AlphaBot2-Pi.

An embedded application for toy-car controlling based on Raspberry Pi 3 Model B and AlphaBot2-Pi. This is the source codes of my programming assignmen

StardustDL 4 Oct 19, 2022
How to configure IOMMU device for nested Proxmox hypervisor (PVE) VM - PCIe Passthrough

Configuring PCIe Passthrough for Nested Virtualization on Proxmox Summary: If you are running bare-metal L0 (level 0) Proxmox (PVE) hypervisor with ne

Travis Johnson 6 Aug 30, 2022
A low power 1U Raspberry Pi cluster server for inexpensive colocation.

Raspberry Pi 1U Server There are server colocation providers that allow hosting a 1U server for as low as $30/month, but there's a catch: There are re

Paul Brown 627 Dec 31, 2022
A Python script to monitor the latest block on an LCD.

PiHole-Monitoring A Python script to monitor the latest block on a lcd display. The first number represents the dns queries from the last 24h, the sec

Maxi 4 Dec 05, 2022
A simple small scale electric car was build which can be driven by remote control and features a fully autonomous parking procedure.

personal-autonomous-parking-car-raspberry A simple electric car model was build using Raspbery pi. The car has remote control and autonomous operation

Kostas Ziovas 2 Jan 26, 2022
HA-Edge-Connector - HA Edge Connector For Python

HA-Edge-Connector 1. Required a. Smartthings Hub & Homeassistant must be in same

chals 21 Dec 29, 2022
Pihole-eink-display - A simple Python script to display PiHole statistics on an eInk Display

Pihole-eink-display - A simple Python script to display PiHole statistics on an eInk Display

Mark McIntyre 64 Oct 11, 2022
Monorepo for my Raspberry Pi dashboard and GPS satellite listener.

🥧 pi dashboard My blog post: Listening to Satellites with my Raspberry Pi This is the monorepo for my Raspberry Pi dashboard!

Andrew Healey 27 Jun 08, 2022
Raspberry Pi Pico as a Rubber Ducky

Raspberry-Pi-Pico-as-a-Rubber-Ducky Kurulum Raspberry Pi Pico cihazınız için CircuitPython'u indirin. Boot düğmesine basılı tutarken cihazı bir USB ba

Furkan Enes POLATOĞLU 6 Dec 13, 2022
This Home Assistant custom component adding support for controlling Midea dehumidifiers on local network.

This custom component for Home assistant adds support for Midea dehumidifier appliances via the local area network. homeassistant-midea-dehumidifier-l

Nenad Bogojevic 91 Dec 28, 2022
Create (templateable) cameras that display qr codes in homeassistant

QRCam This custom component creates cameras displaying qrcodes. The QRCodes can be static or generated from templates. If you use a template as conten

Jannes Müller 5 Oct 06, 2022
Pure micropython ESP32 SPI driver for sdcard and screen at the same SPI bus

micropython-esp32-spi-sdcard-and-screen-driver Proof of concept of Pure micropython espidf SPI driver for sdcard with screen at the same SPI bus (exam

Thomas Favennec 7 Mar 14, 2022
My self-hosting infrastructure, fully automated from empty disk to operating services

Khue's Homelab Current status: ALPHA This project utilizes Infrastructure as Code to automate provisioning, operating, and updating self-hosted servic

Khue Doan 6.4k Dec 31, 2022
Connect a TeslaMate instance to Home Assistant, using MQTT

TeslaBuddy Connect a TeslaMate instance to Home Assistant, using MQTT. It allows basic control of your Tesla vehicle via Home Assistant (currently, ju

4 May 23, 2022
A blender 2.9x addon for managing camera settings

TMG-Camera-Tools A blender 2.9x addon for managing camera settings Tutorial showcasing current features

Mainman002 12 Apr 16, 2022
MPY tool - manage files on devices running MicroPython

mpytool MPY tool - manage files on devices running MicroPython It is an alternative to ampy Target of this project is to make more clean code, faster,

Pavel Revak 5 Aug 17, 2022
A simple non-official manager interface I'm using for my Raspberry Pis.

My Raspberry Pi Manager Overview I have two Raspberry Pi 4 Model B devices that I hooked up to my two TVs (one in my bedroom and the other in my new g

Christian Deacon 21 Jan 04, 2023
A Simple Python KeyLogger App

✨ Kurulum Uygulamayı bilgisayarınızda kullana bilmek için bazı işlemler yapmanız gerekiyor. Aşağıdaki yönlendirmeleri takip ederek bunu yapabilirsiniz

VorteX 7 Jun 11, 2022
Robo Arm :: Rigging is a rigging addon for Blender that helps animating industrial robotic arms.

Robo Arm :: Rigging Robo Arm :: Rigging is a rigging addon for Blender that helps animating industrial robotic arms. It construct serial links(a kind

2 Nov 18, 2021
Programming of Robotics Systems course at the University of Aveiro, Portugal, 2021-2022.

Programação de Sistemas Robóticos Miguel Riem Oliveira Universidade de Aveiro 2021-2022 Projeto AtlasCar Projecto RACE IROS 2014 AtlasCar2 ATOM IROS 2

Miguel Riem de Oliveira 22 Jul 13, 2022