This RaspberryPi project uses weather data to estimate the share of renewable energy in the power grid. From this, the value of CO2 emissions per kWh can be calculated. Visit https://www.agora-energiewende.de/service/agorameter/ for an overview of the electricity mix and the emission value.
The estimated emission value is displayed similar to a traffic light on a green-red scale by leds connected to the RaspberryPi.
NYCT-GTFS - Real-time NYC subway data parsing for humans This python library provides a human-friendly, native python interface for dealing with the N
π€ RoboCop π€ Small Robot, with LIDAR and DepthCamera. Using ROS for Maping and Navigation Made by Clemente Donoso, π Chile π¨π± RoboCop Lateral Fron
Home Assistant AppDeamon - Event predictor WORK IN PROGRESS - CURRENTLY NOT COMPLETE AND NOT WORK This is an idea under development (when I have free
Ingeniamotion Ingeniamotion is a library that works over ingenialink and aims to simplify the interaction with Ingenia's drives. Requirements Python 3
This repository hosts the code for Stanford Pupper and Stanford Woofer, Raspberry Pi-based quadruped robots that can trot, walk, and jump.
About This tool emulates an EMV-CAP device, to illustrate the article "Banque en ligne : Γ la decouverte d'EMV-CAP" published in MISC, issue #56 and f
Cow Feeder is a bot automatically execute trade on cowswap, includes functions: Monitoring Ethereum network gas price and execute trade whe
TAPO-And-Govee-Controller I made this so I can control my Tapo L510 light bulb and Govee H6159 light strip using the PyP100 module and the Govee publi
PiCameleon Is a daemon program meant to provide the RaspberryPi Camera as a service while running according to a configuration.
Introduction THIS IS VERY MUCH ALPHA AND IN ACTIVE DEVELOPMENT. THINGS WILL BREAK! THIS MAY ALSO BREAK YOUR THINGS! SPI driven CircuitPython driver fo
pylorawan Pylorawan is a Micropython wrapper for lorawan devices from RAK Wireless. Tested on a Raspberry PI Pico with a RAK4200(H) Evaluation Board (
Ansible tools for operating and managing fleets of Blinksticks in harmony using the Blinkstick Python library.
DNP3 Stalker Purpose DNP3 Stalker is a project to analyze and interact with DNP3
Red Light Green Light Robot The primary problem addressed by our project is robotic follower behavior i.e. maintaining distance from a moving target.
Automatic CPU speed & power optimizer for Linux based on active monitoring of laptop's battery state, CPU usage, CPU temperature and system load. Ultimately allowing you to improve battery life witho
Home-Assistant Custom Components Custom Components for Home-Assistant (http://www.home-assistant.io) Salus Thermostat Climate Component My device is R
This repository contains all the design files, production files and example code for a simple circular LED display.
Please β this repo if you find it useful Sensor of Temperature Feels Like for Home Assistant Installation Install from HACS (recommended) Have HACS in
MQTT-GPIO A python script to poll RPi GPIO pins and subscribe and publish their state via MQTT using TLS. This script is short and meant to be edited
Segger Embedded Studio project for Flipper Zero firmware Π£ΡΡΠ°Π½ΠΎΠ²ΠΊΠ° ΠΠΎΠ±Π°Π²ΠΈΡΡ Π΄Π°Π½Π½ΡΠΉ ΡΠ΅ΠΏΠΎΠ·ΠΈΡΠΎΡΠΈΠΉ Π² ΠΊΠ°ΡΠ΅ΡΡΠ²Π΅ ΡΠ°Π±ΠΌΠΎΠ΄ΡΠ»Ρ Π² ΠΊΠΎΡΠ΅Π½Ρ Π»ΠΎΠΊΠ°Π»ΡΠ½ΠΎΠΉ ΠΊΠΎΠΏΠΈΠΈ ΡΠ΅ΠΏΠΎΠ·ΠΈΡΠΎΡ
37 Dec 27, 2022
2 Jan 04, 2022
37 Dec 17, 2022
7 Dec 15, 2022
1.2k Dec 25, 2022
28 Nov 21, 2022
6 Apr 20, 2022
0 Nov 23, 2021
52 Oct 16, 2022
1 Jan 14, 2022
3 Nov 04, 2022
3 Aug 10, 2022
2 Feb 10, 2022
2 Nov 20, 2021
3.4k Jan 07, 2023
21 Dec 18, 2022
15 Aug 21, 2022
60 Dec 25, 2022
23 Oct 12, 2021
25 Dec 28, 2022