2D waypoints will be predefined in ROS based robots to navigate to the destination avoiding obstacles.

Overview

waypoint-based-2D-Navigation-in-ROS

2D waypoints will be predefined in ROS based robots to navigate to the destination avoiding obstacles.

A package that will buffer move_base goals until instructed to navigate to all waypoints in sequence.

follow_waypoints

Installation

Install the binaries needed for the package.

sudo apt-get install ros-melodic-follow-waypoints

New features not documented on wiki:

The code can be run in this way:

rosrun follow_waypoints follow_waypoints.py

A wait_duration parameter. This sets wait duration in between waypoints. The default value is set to 0.0 sec.

rosparam set wait_duration 5.0

A distance threshold parameter. Issue the next goal target if the robot reaches within this distance. This has the effect of smoothing motion and not stopping at each waypoint. The default value is set to 0.0 distance which disables the feature.

rosparam set waypoint_distance_tolerance 0.5

Following waypoints will save the list of poses to a file in the following directory:

follow_waypoints/saved_path/pose.csv

To load the previously save path:

rostopic pub /start_journey std_msgs/Empty -1

follow_waypoints

Source

  1. Follow waypoints by Daniel Snider
  2. Follow waypoints by SLAMCore
  3. Follow waypoints by Qbotics Lab
  4. Follow waypoints by Sugbuv
  5. Follow waypoints in ROS Tutorial
Owner
Arghya Chatterjee
Space Robotics Perception, Planning and Autonomy Engineer | CV and ML Researcher | Multi-Robot Autonomy Researcher
Arghya Chatterjee
This is a python script to grab data from Zyxel NSA310 NAS and display in Home Asisstant as sensors.

Home-Assistant Python Scripts Python Scripts for Home-Assistant (http://www.home-assistant.io) Zyxel-NSA310-Home-Assistant Monitoring This is a python

6 Oct 31, 2022
Play a song with a 3D printer.

MIDI to GCODE Play a song with a FDM 3D printer. SLA printers don't have motors, so they cannot play music. Warning: Be ready to turn off the 3D print

Patrick 6 Apr 11, 2022
It is a serial communicator(controller, receiver...), communicate with sensor LP20 which is a laser ranger.

Intro It is a serial communicator(controller, receiver...), communicate with sensor LP20 which is a laser ranger. Its datasheet is contained in this r

3 Sep 19, 2022
A refreshed Python toolbox for building complex digital hardware

A refreshed Python toolbox for building complex digital hardware

nMigen 1k Jan 05, 2023
Real-time Coastal Monitoring at the University of Hawaii at Manoa

Coastal Monitoring at the University of Manoa Source code for Beaglebone/RPi-based data loggers, shore internet gateways, and web server. Software dev

Stanley Lio 7 Dec 07, 2021
Various programs in Atari BASIC for #FujiNet for Atari 8-bit

FujiNet Various programs in Atari BASIC for #FujiNet for Atari 8-bit FujiNet-3D Tic Tac Toe In 1978, Scott Adams wrote a 3-D Tic Tac Toe game, for pla

Kay Savetz 2 Jan 01, 2022
Setup DevTerm to be a cool non-GUI device

DevTerm hobby project I bought this amazing device: DevTerm A-0604. It has a beefy ARM processor, runs a custom version of Armbian, embraces Open Sour

Alex Shteinikov 9 Nov 17, 2022
GUI wrapper designed for convenient service work with TI CC1352/CC2538/CC2652 based Zigbee sticks or gateways. Packed into single executable file

ZigStar GW Multi tool is GUI wrapper firtsly designed for convenient service work with Zig Star LAN GW, but now supports any TI CC1352/CC2538/CC2652 b

133 Jan 01, 2023
A set of postprocessing scripts and macro to accelerate the gyroid infill print speed with Klipper

A set of postprocessing scripts and macro to accelerate the gyroid infill print speed with Klipper

Jérôme W. 75 Jan 07, 2023
Home-Assistant MQTT bridge for Panasonic Comfort Cloud

Panasonic Comfort Cloud MQTT Bridge Home-Assistant MQTT bridge for Panasonic Comfort Cloud. Note: Currently this brige is a one evening prototype proj

Santtu Järvi 2 Jan 04, 2023
DIY split-flap display

The goal is to make a low-cost display that's easy to fabricate at home in small/single quantities (e.g. custom materials can be ordered from Ponoko or similar, and other hardware is generally availa

Scott Bezek 2.5k Jan 05, 2023
Connect a TeslaMate instance to Home Assistant, using MQTT

TeslaBuddy Connect a TeslaMate instance to Home Assistant, using MQTT. It allows basic control of your Tesla vehicle via Home Assistant (currently, ju

4 May 23, 2022
For use with an 8-bit parallel TFT touchscreen using micropython

ILI9341-parallel-TFT-driver-for-micropython For use with an 8-bit parallel TFT touchscreen using micropython. Many thanks to prenticedavid and his MCU

3 Aug 02, 2022
LED effects plugin for klipper

This plugin allows Klipper to run effects and animations on addressable LEDs, such as Neopixels, WS2812 or SK6812.

Julian Schill 238 Jan 04, 2023
Self Driving Car Prototype

Package Delivery Rover 🚀 This project is a prototype of Self Driving Car. It's based on embedded systems, to meet the current requirement of delivery

Abhishek Pawar 1 Oct 31, 2021
OpenStickFirmware is open source software designed to handle any and all tasks required in a custom Fight Stick

OpenStickFirmware is open source software designed to handle any and all tasks required in a custom Fight Stick. It can handle being the brains of your entire stick, or just handling the bells and wh

Sleep Unit 23 Nov 24, 2022
Home Assistant custom integration for e-distribución

e-Distribución is an energy distribution company that covers most of South Spain area. If you live in this area, you probably are able to register into their website to get some information about you

VMG 17 Sep 07, 2022
LUNA: a USB multitool & nMigen library

LUNA is a full toolkit for working with USB using FPGA technology; and provides hardware, gateware, and software to enable USB applications.

Great Scott Gadgets 750 Dec 28, 2022
Modeling and Simulation of Satellite Servicing Manipulators

Modeling and Simulation of Satellite Servicing Manipulators Final Project for the course ENPM662: Introduction to Robot Modeling (Fall 2021). This pro

Adarsh M 1 Jan 24, 2022
Turns a compatible Raspberry Pi device into a smart USB drive for PS4/PS5.

PSBerry A WIP project for Raspberry Pi, which turns a compatible RPI device into a smart USB drive for PS4/PS5. Allows for save management of PS4 game

Filip Tomaszewski 2 Jan 15, 2022