Point Density-Aware Voxels for LiDAR 3D Object Detection (CVPR 2022)

Related tags

HardwarePDV
Overview

PDV

PDV is LiDAR 3D object detection method. This repository is based off [OpenPCDet].

Point Density-Aware Voxels for LiDAR 3D Object Detection
Jordan S. K. Hu, Tianshu Kuai, Steven L. Waslander
[Paper]

PDV diagram

Overview

Changelog

[2022-03-07] PDV v0.1.0 is released.

Model Zoo

KITTI 3D Object Detection Baselines

Selected supported methods are shown in the below table. The results are the 3D detection performance of moderate difficulty on the val set of KITTI dataset.

  • All models are trained with 2 NVIDIA Tesla P100 GPUs and are available for download.
  • The training time is measured with 2 NVIDIA Tesla P100 GPUs and PyTorch 1.7.
training time [email protected] [email protected] [email protected] download
PDV ~23 hours 85.05 57.41 75.95 model-147M

Waymo Open Dataset Baselines

We could not provide the above pretrained models due to Waymo Dataset License Agreement, but you could easily achieve similar performance by training with the default configs. PDV is trained with 10% data (~16k frames) on 4 NVIDIA Tesla V100s GPUs.

Installation

Please refer to INSTALL.md for the installation of OpenPCDet.

Quick Demo

Please refer to DEMO.md for a quick demo to test with a pretrained model and visualize the predicted results on your custom data or the original KITTI data.

Getting Started

Please refer to GETTING_STARTED.md to learn more usage about this project.

License

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Acknowledgement

We would like to thank the authors of OpenPCDet for their open source release of their codebase.

Citation

If you find this project useful in your research, please consider citing:

@article{PDV,
    title={Point Density-Aware Voxels for LiDAR 3D Object Detection},
    author={Jordan S. K. Hu and
            Tianshu Kuai and
            Steven L. Waslander},
    journal={CVPR},
    year={2022}
}
Owner
Toronto Robotics and AI Laboratory
Toronto Robotics and AI Laboratory
Event-based hardware simulation framework

An event-based multi-device simulation framework providing configuration and orchestration of complex multi-device simulations.

Diamond Light Source Controls Group 3 Feb 01, 2022
Pihole-eink-display - A simple Python script to display PiHole statistics on an eInk Display

Pihole-eink-display - A simple Python script to display PiHole statistics on an eInk Display

Mark McIntyre 64 Oct 11, 2022
Sleep Functionality for Adafruit MacroPad RP2040

Adafruit-MacroPad-RP2040 Sleep Functionality for Adafruit MacroPad RP2040 Details This is a modification of AdaFruit project bundle found here specifi

9 Dec 18, 2022
Pi-hole with Inky pHAT ePaper display

Pi-hole with Inky pHAT ePaper display This is my Pi-hole with an ePaper display.

11 Sep 13, 2022
Ansible tools for operating and managing fleets of Blinksticks in harmony using the Blinkstick Python library.

Ansible tools for operating and managing fleets of Blinksticks in harmony using the Blinkstick Python library.

Greg Robinson 3 Aug 10, 2022
The main aim of this project is to avoid the accidents in shredding ( Waste Recycling Industry )

shredder-Machine-Hand-Safety The main aim of this project is to avoid the accidents in shredding ( Waste Recycling Industry ) . The Basic function of

Shubham Chaudhari 1 Nov 15, 2021
Scripts for measuring and displaying thermal behavior on Voron 3D printers

Thermal Profiling Measuring gantry deflection and frame expansion This script runs a series of defined homing and probing routines designed to charact

Jon Sanders 30 Nov 27, 2022
Using a raspberry pi, we listen to the coffee machine and count the number of coffee consumption

A typical datarootsian consumes high-quality fresh coffee in their office environment. The board of dataroots had a very critical decision by the end of 2021-Q2 regarding coffee consumption.

dataroots 51 Nov 21, 2022
Trajectory optimization package for Mini-Pupper robot

Trajectory optimization package for Mini-Pupper robot Purpose of this repository is to provide low-torque and low-impact trajectory for Mini-Pupper qu

Sotaro Katayama 38 Aug 17, 2022
A iot Bike sytem based on RaspberryPi, Ardiuino

Cyclic 's Kernel ---- A iot Bike sytem based on RaspberryPi, Ardiuino, etc 0x1 What is This? Cyclic 's Kernel is an independent System With self-produ

Retr0mous 2 Oct 09, 2022
A 3rd party Moonraker component to create timelapse of 3D prints.

A 3rd party Moonraker component to create timelapse of 3D prints.

Mainsail-Crew 166 Dec 26, 2022
Resmed_myair_sensors - This is a Home Assistant custom component to pull daily CPAP data from ResMed's myAir service using an undocumented API

resmed_myair This component will set up the following platforms. Platform Description sensor Show info from the myAir API. Installation Using the tool

Preston Tamkin 17 Dec 29, 2022
2021 Real Robot Challenge Phase2 attemp

Real_Robot_Challenge_Phase2_AE_attemp We(team name:thriftysnipe) are the first place winner of Phase1 in 2021 Real Robot Challenge. Please see this pa

Qiang Wang 2 Nov 15, 2021
A module for cross-platform control of the mouse and keyboard in python that is simple to install and use.

PyUserInput PyUserInput is a group project so we've moved the project over to a group organization: https://github.com/PyUserInput/PyUserInput . That

Paul Barton 1k Dec 27, 2022
Python module for controlling Broadlink RM2/3 (Pro) remote controls, A1 sensor platforms and SP2/3 smartplugs

Python module for controlling Broadlink RM2/3 (Pro) remote controls, A1 sensor platforms and SP2/3 smartplugs

Matthew Garrett 1.2k Jan 04, 2023
Uses the Duke Energy Gateway to import near real time energy usage into Home Assistant

Duke Energy Gateway This is a custom integration for Home Assistant. It pulls near-real-time energy usage from Duke Energy via the Duke Energy Gateway

Michael Meli 28 Dec 23, 2022
I made this so I can control my Tapo L510 light bulb and Govee H6159 light strip using the PyP100 module and the Govee public API

TAPO-And-Govee-Controller I made this so I can control my Tapo L510 light bulb and Govee H6159 light strip using the PyP100 module and the Govee publi

James Westhead 0 Nov 23, 2021
Custom component for Home Assistant that integrates Candy/Haier Wi-Fi washing machines (also known as Simply-Fi).

Candy Home Assistant component Custom component for Home Assistant that integrates Candy/Haier Wi-Fi washing machines (also known as Simply-Fi). This

Olivér Falvai 61 Dec 29, 2022
This tool emulates an EMV-CAP device, to illustrate the article "Banque en ligne : à la decouverte d'EMV-CAP" published in MISC

About This tool emulates an EMV-CAP device, to illustrate the article "Banque en ligne : à la decouverte d'EMV-CAP" published in MISC, issue #56 and f

Philippe Teuwen 28 Nov 21, 2022
Playing diabolo with two robot arms in ROS + Gazebo

Playing diabolo with robots This repository holds the ROS packages for playing diabolo with two UR5e robot arms on ROS Melodic (Ubuntu 18.04). Read ou

23 Dec 18, 2022